Yeastar UF51-501EU
Σε απόθεμα
SKU: UF51-501EU
Yeastar 5G CPE. Transforms 5G traffic into Wi-Fi or wired Ethernet signals.
Yeastar UF51-501
Yeastar 5G CPE is a 5G connection hub that converts 5G signals into Wi-Fi or wired Ethernet. Running with a router or switch, it connects businesses with ultra-fast networks. High signal quality, wide coverage, and up to 2.5 Gbps download speed empower Yeastar 5G CPE to deliver Gigabit speeds effectively. It also makes it convenient for businesses to reap the benefits of 5G and apply it in various scenarios.
| Specifications | ||
| Hardware System | CPU | Qualcomm Quad-core ARM Cortex-A7，716.8 MHz |
| Memory | 512 MB DDR3 RAM and 8 GB Flash | |
| Cellular Interface | Network | 5G/4G LTE |
| Antenna | 8 × Internal Antennas | |
| SIM Slot | 1（Mini SIM-2FF） | |
| Ethernet Interface | Numbers | 2 × 10/100/1000 Mbps |
| Property | 1 × WAN + 1 × LAN or 2 × LAN | |
| Mode | Full or half duplex (Auto-Sensing) | |
| PoE | 1 × 802.3af PoE PD on WAN/LAN Port | |
| Wi-Fi Interface | Antenna | 4 × Internal Antennas |
| Standards | IEEE 802.11b/g/n，2.4 GHz | |
| IEEE 802.11a/n/ac，5 GHz | ||
| Tx Power | 2.4 GHz: 26dBm (max) | |
| 5 GHz: 26.4dBm (max) | ||
| Rx Sensitivity | 2.4G | |
| 802.11b: ≤ -92dBm@11Mbps | ||
| 802.11g: ≤ -78dBm@54Mbps | ||
| 802.11ac VHT20: ≤ -91dBm@MCS0 | ||
| 802.11ac VHT20: ≤ -66dBm@MCS8 | ||
| 802.11ac VHT40: ≤ -88.5dBm@MCS0 | ||
| 802.11ac VHT40: ≤ -64dBm@MCS8 | ||
| 5G | ||
| 802.11a: ≤ -91dBm@6Mbps | ||
| 802.11a: ≤ -76dBm@54Mbps | ||
| 802.11ac VHT20: ≤ -90dBm@MCS0 | ||
| 802.11ac VHT20: ≤ -68dBm@MCS8 | ||
| 802.11ac VHT40: ≤ -87dBm@MCS0 | ||
| 802.11ac VHT40: ≤ -65dBm@MCS9 | ||
| 802.11ac VHT80: ≤ -84dBm@MCS0 | ||
| 802.11ac VHT80: ≤ -60dBm@MCS9 | ||
| Modes | AP and Client mode | |
| Security | WPA/WPA2 authentication, WEP/TKIP/AES encryption | |
| GPS 1(Optional) | Antenna | 1 × Internal Antenna |
| Technology | GPS/GLONASS/Beidou/Galileo/QZSS | |
| Serial Interface | Numbers | 1 × RS232 or 1 × RS485 (Switchable) |
| Connector | 3.5 mm Terminal Block | |
| Baud Rate | 300bps to 230400bps | |
| DI/DO | Numbers | 1 × DI (dry contact) + 1 × DO (wet contact)， galvanic isolation |
| Connector | 3.5 mm Terminal Block | |
| Maximum V/A | 0.3A@30VDC (DO) | |
| Others | Reset Button | 1 × RESET |
| LED Indicators | 1 × STATUS，1 × 5G (Cellular Networks) | |
| Built-in | Watchdog, RTC, Timer | |
| Software | Network Protocols | PPP, PPPoE, SNMP v1/v2c/v3, TCP, UDP, DHCP, RIPv1/v2, OSPF, DDNS, |
| VRRP, HTTP, HTTPS, DNS, ARP, QOS, SNTP, Telnet, VLAN, SSH, etc. | ||
| VPN | DMVPN, IPsec, OpenVPN, PPTP, L2TP, GRE | |
| Security | Access Control, DMZ, Port Mapping, MAC Binding, SPI Firewalls, | |
| DoS&DDoS Protection, Filtering(IP&Domain), IP Passthrough | ||
| Management | Web, CLI, SMS, On-demand dial up, SNMP v1/v2c/v3, DeviceHub | |
| AAA | Radius, Tacacs+, LDAP, Local Authentication | |
| Multilevel Authority | Multiple Levels of User Authority | |
| Reliability | VRRP, WAN Failover | |
| Serial Port | Transparent (TCP Client/Server, UDP), Modbus Master/Slave, | |
| Modbus Gateway (Modbus RTU to Modbus TCP) | ||
| Power Supply | Power Input | 1. 9-48 VDC, with Surge-Protection and Reverse Polarity Protection |
| 2. 802.3 af PoE PD | ||
| Power Connector | 2-pin 3.5 mm Terminal Block | |
| Physical Characteristics | Ingress Protection | IP67 |
| Housing | Polycarbonate + Metal | |
| Dimensions | No Waterproof Connector: ф105 x 110 x 188 mm (ф4.13 x 4.33 x 7.40 in) | |
| With Waterproof Connector: ф105 x 110 x 218 mm (ф4.13 x 4.33 x 8.58 in) | ||
| Installation | Desktop, Pole Mounting, Wall Mounting, Bottom Magnetic/Lock Mounting | |
| Environmental | Operating Temperature | -40°C to +70°C (-40℉ to +158℉) Reduced Cellular Performance Above 60°C |
| Storage Temperature | -40°C to +85°C (-40℉ to +185℉) | |
| Ethernet Isolation | 1.5 kV RMS | |
| Relative Humidity | 0% to 95% (non-condensing) at 25°C/77℉ | |