Ubiquiti PBE-M5-400-ISO
Κατεβάστε το αρχείο
Description
The Ubiquiti Networks PowerBeam ISO is an airMAX Bridge that is ideal for deployments requiring maximum performance and RF isolation.
The PowerBeam ISO directs RF energy in a tighter beamwidth, and its integrated isolator design improves RF isolation to spatially filter out interference. This combination of focused beam directivity and RF isolation, the PowerBeam ISO blocks noise to improve noise immunity. This is especially important in an area crowded with other RF signals of the same or similar frequency.
Ubiquiti has an InnerFeed technology that integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses. Providing high performance and innovative mechanical design at a low cost, the PowerBeam ISO is extremely versatile and cost‑effective to deploy.
Specifications | |
Processor Specs | Atheros MIPS 74Kc, 560 MHz |
Memory | 64 MB DDR2, 8 MB Flash |
Networking Interface | (1) 10/100/1000 Ethernet Port |
Wireless Approvals | FCC, IC, CE |
RoHS Compliance | Yes |
Dimensions | 459 x 459 x 261 mm (18.07 x 18.07 x 10.28") |
Weight | 3.22 kg (7.10 lb) |
Power Supply | 24V, 0.5A Gigabit PoE |
Power Method | Passive PoE (Pairs 4, 5+; 7, 8 Return) |
Supported Voltage Range | 18-26VDC |
Max. Power Consumption | 8W |
Gain | 25 dBi |
Worldwide Operating Frequency | 5170 - 5875 MHz |
USA Operating Frequency | 5725 - 5850 MHz |
Wind Loading | 390 N @ 200 km/h (88 lbf @ 125 mph) |
Wind Survivability | 200 km/h (125 mph) |
LEDs | (1) Power, (1) LAN, (4) WLAN |
Signal Strength LEDs | Software-Adjustable to Correspond to Custom RSSI Levels |
Channel Sizes | 5/8/10/20/30/40 MHz |
Polarization | Dual Linear |
Enclosure | Outdoor UV Stabilized Plastic |
Mounting | Pole-Mount Kit Included |
ESD/EMP Protection | Air: ± 24 kV, Contact: ± 24 kV |
Operating Temperature | -40 to 70° C (-40 to 158° F) |
Operating Humidity | 5 to 95% Non-Condensing |
Salt Fog Test | IEC 68-2-11 (ASTM B117), Equivalent: MIL-STD-810 G Method 509.5 |
Vibration Test | IEC 68-2-6 |
Temperature Shock Test | IEC 68-2-14 |
UV Test | IEC 68-2-5 at 40° C (104° F), Equivalent: ETS 300 019-1-4 |
Wind-Driven Rain Test | ETS 300 019-1-4, Equivalent: MIL-STD-810 G Method 506.5 |